Philip Harris S-Range Digicounter
Philip Harris S-Range Digicounter
Product code: HE1008422
Product Description
A versatile Digicounter suitable for timing, frequency, period and radioactivity measurement. A built-in high stability crystal controlled oscillator ensures a typical accuracy of 0.005% on all measuring ranges. The period measurement and display function enables very low frequencies to be measured rapidly with a high degree of accuracy. It also allows triggered timing of trolley speeds (etc.) to be performed using a single light gate; and by shorting the period input, infinite radioactivity or frequency counts may be obtained.
- Full Notes for Use included.
Radioactivity:
- Inputs: E.H.T BNC connector for a G.M. tube. Supply voltage adjustable from 300 to 500V
- Counting time: 1, 10, 100 or 1000 seconds and infinity. Can be set to take a single or a continuous series of readings, each being displayed for 3 seconds before the next is taken
- Rate: Obtained by dividing the count reading by the counting time
- Speaker: Output will feed into a speaker of any impedance
- Timing Ranges: 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
- Accuracy: Better than 0.005% ±1 count
- Gating: (1) By manual front panel stop/start switch;(2) By make or break input sockets; (3) By triggering timing stop/start inputs. Output 2V and 6V a.c. at 0.5A for light gate or similar amps
Frequency Inputs:
- Low frequency, d.c. to 3MHz minimum (5MHz typical). Will operate with T.T.L inputs, light gates etc.
- High frequency, capacitively coupled 30Hz to 3MHz minimum (5MHz typical);
- High gain, input voltage required 0.8mV r.m.s. from 30Hz to 20kHz; recommended microphone - high impedance dynamic type
- Input impedance: 20O for inputs (1) and (2); 100kO for input (3)
- Accuracy: Better than 0.005% -+ 1 count
Period:
- Timing intervals: 0.1, 1, 10 and 100ms
This device is compliant to EN61010-2010 with certificates available on request.
Related products include:
- Geiger-Muller Tube (B8H27155) & Geiger-Muller Tube Holder (B8A49724)
- Radioactive Source Handling Tool (B8A49608)
- Radioactive Sources (B849589, B8A49578, or B8A49591)
- Light Gate (B8H27623)
- Atomic Physics & Radiation
- Radioactivity
Further Information
- Accuracy
- Better than 0.005% ±1 count
- Brand
- Philip Harris
- Curriculum Link
- Atomic Physics & Radioactivity
- Frequency Input Impedance
- 20O for inputs (1) and (2); 100kO for input (3)
- Frequency Inputs
- Low FrequencyHigh Frequency and High Gain
- Geiger Muller Tube Input
- E.H.T BNC connectorSupply voltage adjustable from 300 to 500V
- Key Stage Suitability
- Key Stage 4+
- Period Timing Intervals
- 0.1110 and 100ms
- Product Type
- Digicounter
- Radioactivity Counting Time
- 110100 or 1000 seconds and infinity
- Radioactivity Timing Ranges
- 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
Documents
Useful Links
A versatile Digicounter suitable for timing, frequency, period and radioactivity measurement. A built-in high stability crystal controlled oscillator ensures a typical accuracy of 0.005% on all measuring ranges. The period measurement and display function enables very low frequencies to be measured rapidly with a high degree of accuracy. It also allows triggered timing of trolley speeds (etc.) to be performed using a single light gate; and by shorting the period input, infinite radioactivity or frequency counts may be obtained.
- Full Notes for Use included.
Radioactivity:
- Inputs: E.H.T BNC connector for a G.M. tube. Supply voltage adjustable from 300 to 500V
- Counting time: 1, 10, 100 or 1000 seconds and infinity. Can be set to take a single or a continuous series of readings, each being displayed for 3 seconds before the next is taken
- Rate: Obtained by dividing the count reading by the counting time
- Speaker: Output will feed into a speaker of any impedance
- Timing Ranges: 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
- Accuracy: Better than 0.005% ±1 count
- Gating: (1) By manual front panel stop/start switch;(2) By make or break input sockets; (3) By triggering timing stop/start inputs. Output 2V and 6V a.c. at 0.5A for light gate or similar amps
Frequency Inputs:
- Low frequency, d.c. to 3MHz minimum (5MHz typical). Will operate with T.T.L inputs, light gates etc.
- High frequency, capacitively coupled 30Hz to 3MHz minimum (5MHz typical);
- High gain, input voltage required 0.8mV r.m.s. from 30Hz to 20kHz; recommended microphone - high impedance dynamic type
- Input impedance: 20O for inputs (1) and (2); 100kO for input (3)
- Accuracy: Better than 0.005% -+ 1 count
Period:
- Timing intervals: 0.1, 1, 10 and 100ms
This device is compliant to EN61010-2010 with certificates available on request.
Related products include:
- Geiger-Muller Tube (B8H27155) & Geiger-Muller Tube Holder (B8A49724)
- Radioactive Source Handling Tool (B8A49608)
- Radioactive Sources (B849589, B8A49578, or B8A49591)
- Light Gate (B8H27623)
- Atomic Physics & Radiation
- Radioactivity
Further Information
- Accuracy
- Better than 0.005% ±1 count
- Brand
- Philip Harris
- Curriculum Link
- Atomic Physics & Radioactivity
- Frequency Input Impedance
- 20O for inputs (1) and (2); 100kO for input (3)
- Frequency Inputs
- Low FrequencyHigh Frequency and High Gain
- Geiger Muller Tube Input
- E.H.T BNC connectorSupply voltage adjustable from 300 to 500V
- Key Stage Suitability
- Key Stage 4+
- Period Timing Intervals
- 0.1110 and 100ms
- Product Type
- Digicounter
- Radioactivity Counting Time
- 110100 or 1000 seconds and infinity
- Radioactivity Timing Ranges
- 0 to 99.9999 x 0.1ms; 0 to 999.999 x 1ms; 0 to 9999.99 x 0.01s (10ms); 0 to 99999.9 x 0.1s (100ms)
